Tag Archives: #youtube

Summer Jewelry Challenge Week #9…New Techniques and Fun

This has been a very productive week for me in jewelry making.  I have four necklaces and the beginnings of a bracelet to share this week.

First I want to share the Wave Cross Pendant that I made last week.  I oxidized and polished it so it is ready to go.

Here are some pictures of the Wave Cross Pendant…

img_2133
Oxidized Wave Cross Pendant
img_2147
Oxidized Wave Cross Pendant

The second necklace I want to share is a cabochon pendant that I started several weeks ago but finished up this week.  This was my first attempt at wrapping an undrilled gemstone cabochon.  I usually work with drilled beads and most of them are made of glass so this was quite a change.  I used a video from Oxana Crafts on youtube.com to get the basic construction design and then I tried to make the details my own.  I was pleased with how it was going and thought I would try something more fancy with the top half of the design.  I twisted the wire, but found I had a hard time getting it to match up or look as smooth as I wanted it to.  Honestly, I am not crazy about that part of it, but I wasn’t sure what else to do with it so I tried to make the best of it.  The most challenging part of this pendant was finishing the back because it is an undrilled stone that I was trying to encapsulate with the wire instead of building around it with wire like I usually do.  The cabochon kept popping out of the back and it was quite frustrating, but I finished it and then set it aside for several weeks.  This week I finished up the top part of it and then oxidized it.  I am still unsure if I like working with cabochons, but I will wait to make the final call until I have done a few more.  I do know that I really enjoy looking at cabochons, especially labradorite!

Here are some pictures of my cabochon necklace…

img_2148
Cabochon Pendant
img_2134
Cabochon Pendant
img_2135
Back View of Cabochon Pendant

The last three things I have to share are what I made this week.  I have really been wanting to try some new techniques so I dove into them this week.

The first technique I tried was making swirls with my wire instead of weaving it.  The first pendant I made using this technique was using the Swirly Twirly Lampwork Bead Pendant from Oxana Crafts (youtube).  The lampwork bead I used in this pendant was made by Katerina Sojkova.  I found this technique to be quite fun and easy to use.  I was able to be relaxed about making the piece and didn’t feel like it had to be a certain way and that is the kind of mindset this technique needs.

Here are some pictures…

img_2150
Swirly Twirly Pendant
img_2138
Swirly Twirly Pendant
quarterstack
Swirly Twirly Pendant

Isn’t it so cute!  I included the picture with a quarter to show how small it is.  One of the best things about this technique is that it can be done pretty quickly which gives me options to make a simple and more economical necklace.

The other tutorial by Oxana Crafts (youtube) that I used is called Swirly Bead Pendant.  I incorporate the swirl technique and wire weaving in the same pendant.  I found myself really wanting to make something else this week and this pendant was it.  It was a fun pendant to make and again didn’t take as long as some of my other pieces.

Here are some pictures…

img_2149
Swirly Bead Pendant
img_2136
Swirly Bead Pendant

Didn’t it turn out pretty!  I was surprised at how much I liked this pendant because normally I like symmetry, not organic designs.  It just goes to show that I am becoming more and more relaxed in my perfectionist tendencies…enough to see beauty where there isn’t a lot of order.

The final piece I have to share this week isn’t anywhere near finished, but it showcased the other technique I learned this week.  It is braiding with five strands of wire.  I used the 5 Strand Braid Wire Wrapped Cabochon video tutorial by CSL Designs (youtube) to learn this technique.  I may try it with a cabochon one day, but I wanted to create a bracelet with it this week.  The technique was easy to learn and wouldn’t normally be challenging to apply, but I have a knack for complicating things.  Since I was making a bracelet and I wanted it to be sturdy I decided to use 14 gauge wire to braid.  That is the thickest gauge I have worked with personally.  Most of my work is made using 22 and 28 gauge wire, so the 14 gauge was a bit of a shock to my hands.  I eventually got the braid to work out okay and did a section large enough for a bracelet.  Then I added some half round wire to hold it together and shaped it around my bracelet mandrel.  That is how far I made it before I decided to save it for another day.

Here is a picture of the progress so far…

img_2128
5 Strand Braided Bracelet

It is definitely rough around the edges, and I almost tossed it, but I saw its potential and decided to save it for another day.

Whew!  That was a lot to share for one week.  I hope you enjoyed what I made because I know I enjoyed learning the new techniques and making them.  I hope you have a great week to come!

Advertisements